All, The language below is from Section 3.6 of the latest version of the GNSO Operating Procedures (https://gnso.icann.org/sites/default/files/file/field-file-attach/op-procedu...) and is being proposed to guide the work of the SPIRT. To address the question raised by Anne, the Chair must indicate whether there are any minority views regardless of whether there is Full Consensus, Strong support, etc. ************************************** 3.6 Standard Methodology for Making Decisions The Chair will be responsible for designating each position as having one of the following designations: * Full consensus - when no one in the group speaks against the recommendation in its last readings. This is also sometimes referred to as Unanimous Consensus. * Consensus - a position where only a small minority disagrees, but most agree.4 * Strong support but significant opposition - a position where, while most of the group supports a recommendation, there are a significant number of those who do not support it. * Divergence (also referred to as No Consensus) - a position where there isn't strong support for any particular position, but many different points of view. Sometimes this is due to irreconcilable differences of opinion and sometimes it is due to the fact that no one has a particularly strong or convincing viewpoint, but the members of the group agree that it is worth listing the issue in the report nonetheless. * Minority View - refers to a proposal where a small number of people support the recommendation. This can happen in response to a Consensus, Strong support but significant opposition, and No Consensus; or, it can happen in cases where there is neither support nor opposition to a suggestion made by a small number of individuals. In cases of Consensus, Strong support but significant opposition, and No Consensus, an effort should be made to document that variance in viewpoint and to present any Minority View recommendations that may have been made. Documentation of Minority View recommendations normally depends on text offered by the proponent(s). In all cases of Divergence, the WG Chair should encourage the submission of minority viewpoint(s). The recommended method for discovering the consensus level designation on recommendations should work as follows: i. After the group has discussed an issue long enough for all issues to have been raised, understood and discussed, the Chair, or Co-Chairs, make an evaluation of the designation and publish it for the group to review. ii. After the group has discussed the Chair's estimation of designation, the Chair, or Co-Chairs, should reevaluate and publish an updated evaluation. iii. Steps (i) and (ii) should continue until the Chair/Co-Chairs make an evaluation that is accepted by the group. iv. In rare case, a Chair may decide that the use of polls is reasonable. Some of the reasons for this might be: * A decision needs to be made within a time frame that does not allow for the natural process of iteration and settling on a designation to occur. * It becomes obvious after several iterations that it is impossible to arrive at a designation. This will happen most often when trying to discriminate between Consensus and Strong support but Significant Opposition or between Strong support but Significant Opposition and Divergence. Care should be taken in using polls that they do not become votes. A liability with the use of polls is that, in situations where there is Divergence or Strong Opposition, there are often disagreements about the meanings of the poll questions or of the poll results. Based upon the WG's needs, the Chair may direct that WG participants do not have to have their name explicitly associated with any Full Consensus or Consensus view/position. However, in all other cases and in those cases where a group member represents the minority viewpoint, their name must be explicitly linked, especially in those cases where polls where taken. If a Chartering Organization wishes to deviate from the standard methodology for making decisions or empower the WG to decide its own decision-making methodology it should be affirmatively stated in the WG Charter. Consensus calls should always involve the entire Working Group and, for this reason, should take place on the designated mailing list to ensure that all Working Group members have the opportunity to fully participate in the consensus process. It is the role of the Chair to designate which level of consensus is reached and announce this designation to the Working Group. Member(s) of the Working Group should be able to challenge the designation of the Chair as part of the Working Group discussion. However, if disagreement persists, members of the WG may use the process set forth below to challenge the designation. If several participants5 in a WG disagree with the designation given to a position by the Chair or any other consensus call, they may follow these steps sequentially: 1. Send email to the Chair, copying the WG explaining why the decision is believed to be in error. 2. If the Chair still disagrees with the complainants, the Chair will forward the appeal to the CO liaison(s). The Chair must explain his or her reasoning in the response to the complainants and in the submission to the liaison. If the liaison(s) supports the Chair's position, the liaison(s) will provide their response to the complainants. The liaison(s) must explain their reasoning in the response. If the CO liaison disagrees with the Chair, the liaison will forward the appeal to the CO. Should the complainants disagree with the liaison support of the Chair's determination, the complainants may appeal to the Chair of the CO or their designated representative. If the CO agrees with the complainants' position, the CO should recommend remedial action to the Chair. 3. In the event of any appeal, the CO will attach a statement of the appeal to the WG and/or Board report. This statement should include all of the documentation from all steps in the appeals process and should include a statement from the CO. Jeff Neuman Senior Vice President Com Laude | Valideus 1751 Pinnacle Drive Suite 600, McLean VA 22102, USA M: +1.202.549.5079 D: +1.703.635.7514 E: jeff.neuman@comlaude.com<mailto:jeff.neuman@comlaude.com> www.comlaude.com<http://www.comlaude.com/> [cid:image003.jpg@01D5C593.DF721E00] ________________________________ The contents of this email and any attachments are confidential to the intended recipient. They may not be disclosed, used by or copied in any way by anyone other than the intended recipient. If you have received this message in error, please return it to the sender (deleting the body of the email and attachments in your reply) and immediately and permanently delete it. Please note that the Com Laude Group does not accept any responsibility for viruses and it is your responsibility to scan or otherwise check this email and any attachments. The Com Laude Group does not accept liability for statements which are clearly the sender's own and not made on behalf of the group or one of its member entities. The Com Laude Group includes Nom-IQ Limited t/a Com Laude, a company registered in England and Wales with company number 5047655 and registered office at 28-30 Little Russell Street, London, WC1A 2HN England; Valideus Limited, a company registered in England and Wales with company number 06181291 and registered office at 28-30 Little Russell Street, London, WC1A 2HN England; Demys Limited, a company registered in Scotland with company number SC197176, having its registered office at 33 Melville Street, Edinburgh, Lothian, EH3 7JF Scotland; Consonum, Inc. dba Com Laude USA and Valideus USA, headquartered at 1751 Pinnacle Drive, Suite 600, McLean, VA 22102, USA; Com Laude (Japan) Corporation, a company registered in Japan having its registered office at Suite 319,1-3-21 Shinkawa, Chuo-ku, Tokyo, 104-0033, Japan. For further information see www.comlaude.com<https://comlaude.com>
